First six months

Solid timber adjusts to the humidity of its surroundings for the first few months after installation. Minor movement, slight gaps at joints, or small changes in how the door sits are normal during this period and are not defects. If a door binds or does not close cleanly after [3 months], contact us.

Routine cleaning

  • Wipe with a dry or lightly damp soft cloth.

  • Dry the surface immediately afterwards.

  • Do not use detergents, bleach, ammonia-based cleaners, thinners, or abrasive pads.

  • Do not allow water to stand on the surface or at the base of the door.

Polish and finish

The factory finish is [specify: PU / melamine / natural oil]. Under normal interior conditions it should be reapplied every [X] years. Doors in direct sun, driving rain, or coastal air may need it sooner. We offer re-polishing as a paid service in [Kochi / Kerala]; contact us for details.

Humidity, sun and rain

Doors are manufactured for Kerala’s climate but are not weatherproof. An external door should be protected by an overhang or porch. Continuous direct sunlight will lighten the timber over time. Standing water, water seepage from flooring, or prolonged exposure to rain can cause swelling, warping or finish failure, and damage from these causes is not covered under warranty.

Hardware

Tighten hinge and handle screws if they loosen. Lubricate locks and hinges every [6 months]. Do not hang additional weight from the door leaf. Fitting hardware that requires new cutting or boring after delivery may affect the warranty.

Natural variation

Timber is a natural material. Variation in grain, colour and figure between doors, and between a door and its photograph, is expected. Colour will deepen with age. These characteristics are not defects.

Routine cleaning

  • Adhesive tape, stickers or adhesive hooks on finished surfaces

  • Covering a new door in plastic sheeting for long periods

  • Cleaning agents not listed above

  • Sanding, repainting or refinishing by a third party during the warranty period